How to Remove Security Ink Tag from Clothes
Security ink tags are commonly used in retail stores to prevent theft. However, these tags can be quite stubborn and difficult to remove from clothes. If you find yourself with a security ink tag stuck on your garment, don’t worry; there are several effective methods to remove it without damaging the fabric. In this article, we will discuss various techniques to help you successfully remove security ink tags from your clothes.
1. Use Goo-Gone or a similar solvent:
Goo-Gone is a powerful solvent that can dissolve the adhesive on security ink tags. Here’s how to use it:
1. Apply a small amount of Goo-Gone to a cotton ball or soft cloth.
2. Gently rub the solvent onto the ink tag, focusing on the adhesive area.
3. Wait for a few minutes to allow the solvent to work.
4. Gently peel the tag off the fabric.
5. Wash the garment as usual to remove any remaining residue.
2. Use rubbing alcohol:
Rubbing alcohol is another effective solvent that can help remove security ink tags. Follow these steps:
1. Dampen a cotton ball or soft cloth with rubbing alcohol.
2. Apply the alcohol to the ink tag, focusing on the adhesive area.
3. Wait for a few minutes to allow the alcohol to break down the adhesive.
4. Gently peel the tag off the fabric.
5. Wash the garment as usual to remove any residue.
3. Use WD-40:
WD-40 is a versatile solvent that can also be used to remove security ink tags. Here’s how to use it:
1. Spray a small amount of WD-40 directly onto the ink tag.
2. Wait for a few minutes to allow the solvent to work.
3. Gently peel the tag off the fabric.
4. Wash the garment as usual to remove any residue.
4. Use a hairdryer:
If you don’t have access to solvents, you can try using a hairdryer to heat the ink tag. Here’s how:
1. Set your hairdryer to a low heat setting.
2. Hold the hairdryer about 6 inches away from the ink tag and heat it for about 30 seconds.
3. Gently peel the tag off the fabric.
4. If the tag is still not coming off, repeat the process until it does.
5. Use a razor blade:
If the above methods don’t work, you can try using a razor blade to carefully cut the tag off the fabric. Here’s how:
1. Place the garment on a flat surface.
2. Hold the razor blade at a 45-degree angle.
3. Carefully cut the tag off the fabric, being cautious not to damage the fabric.
4. Wash the garment as usual to remove any residue.
Remember to always test these methods on a small, inconspicuous area of the garment first to ensure that the fabric is not damaged. By following these steps, you should be able to remove security ink tags from your clothes without any issues.
