2015 Hyundai Santa Fe Limited Splash Guard Removal
The 2015 Hyundai Santa Fe Limited is a popular midsize SUV known for its spacious interior, reliable performance, and stylish design. However, there may come a time when you need to remove the splash guards for various reasons, such as replacing them, cleaning, or making modifications. In this article, we will guide you through the process of removing the splash guards on a 2015 Hyundai Santa Fe Limited.
Tools and Materials Needed
Before you begin the removal process, make sure you have the following tools and materials:
– Socket set (including socket wrench and sockets)
– Screwdriver set (including flathead and Phillips)
– Pliers
– rag or towel
– Optional: gloves
Preparation
Before you start, it’s essential to prepare the area where you will be working. Clear the space under the vehicle and make sure you have good lighting. It would also be helpful to have a helper to hold the splash guard in place while you remove the screws.
Removing the Left Rear Splash Guard
1. Begin by locating the left rear splash guard on your 2015 Hyundai Santa Fe Limited.
2. Remove the four screws that hold the splash guard in place using a socket set.
3. Once the screws are removed, gently pull the splash guard away from the vehicle to release it from its mounting points.
4. If the splash guard is difficult to remove, use pliers to gently twist it free.
Removing the Right Rear Splash Guard
The process for removing the right rear splash guard is similar to that of the left rear splash guard:
1. Locate the right rear splash guard on your vehicle.
2. Remove the four screws that secure it in place using a socket set.
3. Gently pull the splash guard away from the vehicle to release it from its mounting points.
4. If necessary, use pliers to twist the splash guard free.
Removing the Left Front Splash Guard
1. Locate the left front splash guard on your 2015 Hyundai Santa Fe Limited.
2. Remove the four screws that hold the splash guard in place using a socket set.
3. Gently pull the splash guard away from the vehicle to release it from its mounting points.
4. If the splash guard is difficult to remove, use pliers to gently twist it free.
Removing the Right Front Splash Guard
The process for removing the right front splash guard is similar to that of the left front splash guard:
1. Locate the right front splash guard on your vehicle.
2. Remove the four screws that secure it in place using a socket set.
3. Gently pull the splash guard away from the vehicle to release it from its mounting points.
4. If necessary, use pliers to twist the splash guard free.
Reassembly
After you have completed the removal of all four splash guards, it’s time to reassemble them. Simply reverse the steps you took to remove them:
1. Place the splash guards back into their mounting points.
2. Secure them in place using the screws and socket set.
3. Tighten the screws to the manufacturer’s specifications.
Conclusion
Removing the splash guards on a 2015 Hyundai Santa Fe Limited is a relatively straightforward process that can be completed with basic tools. By following these steps, you can easily replace, clean, or modify your splash guards as needed. Always remember to take your time and handle the parts with care to avoid damaging them.
